GSM-alarm system and automatic control for home NEW!

intruder alarm system with functions of automatic control and GSM-alert.

System Functions:

1. protection against intrusion and fire;
2. protection against leakage of water;
3. control and prevention of gas leaks;
4. control light and electrical power;
5. alert the owner about the condition or alarm situations using SMS-messages;

The system works:

Leaving the house, the owner activates the system using the reader and applied to it an identification key (iButton, Proximity-card, biometrics). Thus:

facilities are put under the protection of (a function of fire alarm);
electrical network is de-energized, leaving the only run necessary devices (eg, refrigerator);
carried off lighting or go to work for a given scenario.
if necessary or accident stops the supply of water;

In the case of triggering an alarm or automation, the user immediately receives an SMS-message about the situation in his home (leakage, penetration, fire, etc.), while at his request may also include light and sound siren.

main components of the system:

Ohrannaya alarm system with functions of automatic control and GSM-opovescheniem.

Features

installation:

all devices Legos are targeted and integrated a unified information system bus that allows you to effectively monitor the state of the system;
main components of the system ( controller , GSM-module , < a href = "/ products / additional / # aps5"> address power supply ) are mounted on DIN-rail mounting in a standard electro boxing;
programming is carried out using a personal computer and specialized software.

example of the calculation system:

2x bedroom apartment. The total area of 58 square meters.

burglar alarm (5 Address: front door — opening / break + volume premises);
fire alarm (4 addresses);
control and prevention of leaks of water (3 addresses);
control and prevention of gas leaks (1 address);
control light (1 group) and electrical power (2 groups).

composition and cost of the system:

Name		Price / ea., rub.	Quantity	Sum, rub.
*Equipment Legos*
1	*Controller L32* Monitoring and Control: ACS, OPS, automatic. In the plastic case 90/62/35 mm, mounting on DIN-rail mounting. Address data bus — 32 addresses. Nonvolatile memory — 32000 events / users. 64 internal reactions, the internal timers. Functions defined by a set of targeted microarray. Upit = 10-15 V DC	8518	1	8518
2	*GSM module L3G* possibility of sending SMS messages about events. Plastic casing 90/62/35 mm, mounting on DIN-rail mounting. External antenna connection on the bus L-BUS. Supply voltage 12 V DC. Maximum current 3 A	6857	1	6857
3	*APS 5* Stabilized power supply. Plastic casing. Control of the charging current, turning off peripherals when V <10 V. For the L3 as the address. Mounting on DIN-Rail	4998	1	4998
4	*PLR2EH* Proximity card reader standard EM-Marine and HID (Interface Touch Memory/Wiegand-26). Synchronization readers. Invoice. Display: lighting, sound. In the plastic case ABS.	3193	1	3193
5	*Astra 4232 L* smoke-detector opto-electronic analogue addressable	592	3	1,776
6	*Addressable microchip DGV* Control «dry contacts» connected peripherals. Managed Output TTL (U = 5 V DC, I = 15 mA)	224	7	1,568
7	*Addressable microchip DGR* Control «dry contacts» connected peripherals. Built-managed key open collector (U = 60 V DC, I = 0,5 A)	593	5	2,965
8	*Addressable Chikrochip DTR* manage remote reader	240	1	240
Additional third-party equipment *
9	*battery 12V, 7Ach*	500	1	500
10	*IO102-4 (5)* detector magneto-pin note (mortise) IO102-4 (5)	40	1	40
11	*Patrol 701 (curtain lens)* passive infrared detector volume	380	1	380
12	*Patrol 701 (wide-angle lens)* passive infrared detector volume	380	3	1,140
13	*Lighthouse 12KP* Alerter burglar and fire combined (combo)	220	1	220
14	*IP101-23* detector fire-differential thermal maximum	290	2	580
15	*E412NL* Basis for IP101-23	245	1	245
16	*H20-contact* detector spill water	430	3	1,290
17	*GDR-1224M* detector alarm Gas leak (natural)	981	1	981
18	*CRYDOM D2425* Solid state relay 25A/280 VAC	1,770	2	3540
19	*CRYDOM D2450* Solid state relay 50A/280 VAC	1,710	1	1,710
20	*CRYDOM D24125* Solid state relay 125A/280VAC	1,800	2	3600
21	**HC22-DP (Neptune)*** ball valve with electric	3050	2	6100
Total Equipment Legos				30115
Total additional equipment				20325
Total cost				50440

To program the system requires converter CLU

* Prices for additional equipment presented at 01.08.2009g.

In case you have not found a suitable solution for you, please contact our Project Office.